Inspecting /boot/System.map-2.6.11.4-21.13-smp
Loaded 23379 symbols from /boot/System.map-2.6.11.4-21.13-smp.
Symbols match kernel version 2.6.11.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.11.4-21.13-smp (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Mon Jul 17 09:21:59 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
<4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003eff0000 (usable)
<4> BIOS-e820: 000000003eff0000 - 000000003eff3000 (ACPI NVS)
<4> BIOS-e820: 000000003eff3000 - 000000003f000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<5>111MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000f5230
<7>On node 0 totalpages: 258032
<7> DMA zone: 4096 pages, LIFO batch:1
<7> Normal zone: 225280 pages, LIFO batch:16
<7> HighMem zone: 28656 pages, LIFO batch:6
<6>DMI 2.3 present.
<6>Using APIC driver default
<7>ACPI: RSDP (v000 GBT ) @ 0x000f6c30
<7>ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3eff3000
<7>ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3eff3040
<7>ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3eff7380
<7>ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x1008
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 15:3 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<4>Processor #1 15:3 APIC version 20
<6>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
<6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 3f000000 (gap: 3f000000:bfc00000)
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/hdd9 vga=0x31a selinux=0 splash=silent resume=/dev/hdd8 56
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 65536 bytes)
<4>Detected 3015.531 MHz processor.
<6>Using pmtmr for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 1016576k/1032128k available (2115k kernel code, 14876k reserved, 699k data, 248k init, 114624k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080)
<6>Security Framework v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
<4>monitor/mwait feature present.
<4>using mwait in idle threads.
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<6>CPU: Physical Processor ID: 0
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 1453k freed
<6>ACPI: Looking for DSDT in initrd... not found!
<4> not found!
<4>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
<4>per-CPU timeslice cutoff: 2925.38 usecs.
<4>task migration cache decay timeout: 3 msecs.
<4>Booting processor 1/1 eip 3000
<6>Initializing CPU#1
<7>Calibrating delay loop... 6012.92 BogoMIPS (lpj=3006464)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
<4>monitor/mwait feature present.
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
<6>CPU: L2 cache: 1024K
<6>CPU: Physical Processor ID: 0
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU1: Thermal monitoring enabled
<4>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
<6>Total of 2 processors activated (11993.08 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 pin1=2 pin2=-1
<6>checking TSC synchronization across 2 CPUs: passed.
<4>Brought up 2 CPUs
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb2e0, last bus=1
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20050211
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 12 devices
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<4>TC classifier action (bugs to
netdev@oss.sgi.com cc
hadi@cyberus.ca)
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: disabled - APM is not SMP safe.
<6>audit: initializing netlink socket (disabled)
<3>audit(1157751591.638:0): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 16192k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
<6>vesafb: protected mode interface info at 00ff:44f0
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81978 bytes,<6>...found (1280x1024, 54169 bytes, v3).
<4>Console: switching to colour frame buffer device 158x59
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 8192 buckets, 64Kbytes
<4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>NET: Registered protocol family 1
<6>Starting balanced_irq
<7>PM: Checking swsusp image.
<7>PM: Resume from disk failed.
<4>ACPI wakeup devices:
<4>SLPB PCI0 HUB0 USB0 USB1 USB2 USB3 USBE
<6>ACPI: (supports S0 S1 S4 S5)
<6>Freeing unused kernel memory: 248k freed
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH5: IDE controller at PCI slot 0000:00:1f.1
<6>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
<6>ICH5: chipset revision 2
<6>ICH5: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda
io, hdb
io
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc
io, hdd
MA
<7>Probing IDE interface ide0...
<6>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
<7>Probing IDE interface ide1...
<4>hdd: ST3120022A, ATA DISK drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hdd: max request size: 1024KiB
<6>hdd: Host Protected Area detected.
<4> current capacity is 234439535 sectors (120033 MB)
<4> native capacity is 234441648 sectors (120034 MB)
<6>hdd: Host Protected Area disabled.
<6>hdd: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
<6>hdd: cache flushes supported
<6> hdd: hdd1 hdd2 < hdd5 hdd6 hdd7 hdd8 hdd9 >
<4>Attempting manual resume
<7>PM: Checking swsusp image.
<3>swsusp: Suspend partition has wrong signature?
<7>PM: Resume from disk failed.
<5>ReiserFS: hdd9: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hdd9: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hdd9: journal params: device hdd9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hdd9: checking transaction log (hdd9)
<5>ReiserFS: hdd9: Using r5 hash to sort names
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel@redhat.com
<6>NTFS driver 2.1.22 [Flags: R/W MODULE].
<3>NTFS-fs error (device hdd1): read_ntfs_boot_sector(): Primary boot sector is invalid.
<3>NTFS-fs error (device hdd1): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
<3>NTFS-fs error (device hdd1): ntfs_fill_super(): Not an NTFS volume.
<6>NTFS volume version 3.1.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Sep 8 21:40:21 2006
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>checkproc: /sbin/udevd 2256
done
Initializing random number generatordone
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
<notice>startproc: execve (/usr/bin/dbus-daemon-1) [ /usr/bin/dbus-daemon-1 --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon-1 ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-BUS daemondone
Starting resource managerdone
<notice>startproc: execve (/sbin/cardmgr) [ /sbin/cardmgr ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/sbin/cardmgr ]
Loading keymap qwerty/us.map.gz
done/usr/sbin/hwinfo: error while loading shared libraries: libdbus-1.so.2: cannot open shared object file: No such file or directory
Loading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneStarting PCMCIA done
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= INIT_VERSION=sysvinit-2.85 INIT=/sbin/init KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= vga=0x31a RUNLEVEL=5 LC_COLLATE= SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=zh_CN.UTF-8 ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=zh_CN.UTF-8 SPLASH=yes splash=silent LC_TIME= ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
Starting service kdmdone
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Marvell Technology Group Ltd. Gigabit Ethernet Controller (rev 13)
eth0 configuration: eth-id-00:0d:61:9f:0f:8d
eth0 IP address: 10.1.9.2/24
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/rendezvous.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Starting mdnsddone
Mount SMB/ CIFS File Systems unused
<notice>startproc: execve (/opt/gnome/bin/netdaemon) [ /opt/gnome/bin/netdaemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/opt/gnome/bin/netdaemon ]
Starting the netdaemondone
Starting sound driver: intel8x0WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
done
WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
Starting mail service (Postfix)done
Starting httpd2 (prefork) /usr/sbin/httpd2-prefork: error while loading shared libraries: libexpat.so.1: cannot open shared object file: No such file or directory
The command line was:
/usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf
failed<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
<notice>startproc: execve (/usr/sbin/famd) [ /usr/sbin/famd -t 4 -T 0 -L ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/sbin/famd ]
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting nfsboot (sm-notify) done
Starting Name Service Cache Daemondone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Starting service kdmdone
Starting File Access Monitoring Daemondone
Starting CRON daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting cupsdioprio_set: Function not implemented
done
Starting HAL daemondone
/usr/sbin/hald: error while loading shared libraries: libdbus-glib-1.so.0: cannot open shared object file: No such file or directory
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.85 INIT=/sbin/init REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg ROOTFS_REALDEV=/lib/klibc//dev/hdd9 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdd9 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
Starting SSH daemondone
Starting INET services. (xinetd)done
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -v 3 ], [ HOME=/ PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting powersaved: /usr/bin/powersave: error while loading shared libraries: libhal.so.1: cannot open shared object file: No such file or directory
done
/usr/sbin/powersaved: error while loading shared libraries: libhal.so.1: cannot open shared object file: No such file or directory
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 1: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 2: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 3: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 4: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 5: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 6: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 7: ignoring bad line starting with 'blacklist'
WARNING: /etc/modprobe.d/prism2 line 8: ignoring bad line starting with 'blacklist'
done
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: apache2
Skipped services in runlevel 5: smbfs nfs
<notice>killproc: kill(5387,3)
2006-09-08, 10:50 PM
我的suse的出现的问题我贴出来大家回复一下谢谢
平板模式
